-
GENOCURE* CQ Photoinitiators
Specifications
- Category Photoinitiators
- REACH No
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
provides good through cure in long wavelength (visible) light, soluble in alcohol, ketones, acrylates and methacrylates
Recommended applications
- Electronics
- Adhesives
- Medical
- 3D Printing
-
GENOMER* 1229M Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 10 mPa*s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
TEGDMA / TRGDMA, low viscosity, excellent flexibility, good adhesion, good heat and chemical resistance, hydrophilic
Recommended applications
- Composites
- Adhesives
- Coatings on Plastics
- Medical
- 3D Printing
-
GENOMER* 1232M Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 15 mPa*s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
PEG200DMA (Polyethylene Glycol (200) Dimethacrylate) monomer, low viscosity, hardness, good heat resistance
Recommended applications
- Composites
- Coatings on Plastics
- Medical
- 3D Printing
-
GENOMER* 1251M Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 35 mPa*s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
PEG400DMA (Polyethylene Glycol (400) Dimethacrylate) monomer; low viscosity, flexibility, good adhesion, high clarity, low ashes
Recommended applications
- Composites
- Adhesives
- Coatings on Plastics
- Medical
- 3D Printing
-
GENOMER* 1254M Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 650 mPa.s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
Low shrinkage, low volatility, good heat resistance, high refractive index, good chemical resistance, good adhesion on various substrates
Recommended applications
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Medical
- Digital Inks
- 3D Printing
-
GENOMER* 1280M Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 390 mPa*s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
Ethoxylated Bisphenol A Dimethacrylate monomer, low shrinkage, low odor, low volatility, good impact resistance, high clarity
Recommended applications
- Composites
- Adhesives
- Coatings on Plastics
- Medical
- 3D Printing
-
GENOMER* 2297 Epoxy (Meth)Acrylates
Specifications
- Category Epoxy (Meth)Acrylates
- Functionality 2
- Viscosity 2500 - 4500mPa*s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
low shrinkage, high stress resistance, high e-modulus, high abrasion resistance, high hardness and scratch resistance, good adhesion, monomer-free.
The product improves resistance to solvents and chemicals.Recommended applications
- Medical
- 3D Printing
-
GENOMER* 4205 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity 9 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
Urethane Methacrylate. High E-modulus and good tensile strength, other characteristics are its light stability, abrasion and chemical resistance
Recommended applications
- Adhesives
- Medical
- 3D Printing
-
GENOMER* 4247 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity 10 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
Exceptional film hardness, good mechanical properties
Recommended applications
- Adhesives
- Medical
- 3D Printing
-
GENOMER* 4256 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity 15 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
excellent elasticity and elongation, improves light stability and chemical resistance
Recommended applications
- Adhesives
- Medical
- 3D Printing
-
GENOMER* 4270 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity ~6'000 mPa*s
- REACH Yes
- TSCA Yes
- IECSC No
- Swiss ordinance 1
- Bio content (%) 0
Key features
Excellent rebound properties, high toughness, optimal elongation / Tg ratio, low yellowing, low shrinkage and good adhesion
Recommended applications
- Adhesives
- 3D Printing
- Medical
-
GENOMER* 4277 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity 19 000 (60°C/140°F)
- REACH Yes
- TSCA No
- IECSC No
- Swiss ordinance 2
Key features
Urethane Methacrylate, High flexibility and toughness, high transparency and low yellowing, good adhesion, low cure exotherm exothermic
Recommended applications
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Medical
- 3D Printing
-
GENOMER* 4281 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity ~100 000 mPa*s
- REACH Yes
- TSCA No
- IECSC No
- Swiss ordinance 1
- Bio content (%) 55
Key features
High Hardness, high scratch and abrasion resistance, low yellowing, exceptional clarity, good adhesion
Recommended applications
- Coatings on Plastics
- Medical
- Digital Inks
- 3D Printing
-
GENOMER* 4297 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity 8 700
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
Urethane Methacrylate. Good stain and chemical resistance, high tensile strength and E-modulus, good abrasion resistance and very low yellowing
Recommended applications
- Adhesives
- Medical
- 3D Printing
-
GENOMER* 7244 Specialities
Specifications
- Category Specialities
- Functionality 2
- Viscosity 15 000 mPa.s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
low shrinkage, high tensile strength and high e-modulus, high rigidity for 3D parts, high abrasion resistance, good adhesion
Recommended applications
- Coatings on Plastics
- Medical
- 3D Printing
-
GENOMER* 7302 Specialities
Specifications
- Category Specialities
- Functionality 3
- Viscosity 110
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
- Bio content (%) 0
Key features
Specialty Resin, low viscosity, low odor, low oxygen inhibition, enhanced surface cure
Recommended applications
- Overprint Varnishes
- Wood Coatings
- Electronics
- Adhesives
- Coatings on Plastics
- Medical
- 3D Printing
